TEC Electric 0.12kW 3ph 8 Pole Foot Mounting 71 Frame AC Motor for 230V or 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz.
Fixed Main Supply Output: 0.12kW (0.16HP) x 690RPM at 230V or 400V x 50Hz 3ph.
Inverter Drive Supply Output: 20:1 Speed Control range from 69RPM to 1380RPM, with suitable de-rating at the lower speeds (80Hz is the maximum continuous for maximum output, as advised by the Manufacturer).
Full Load Current - 0.93A at 230V, or 0.54A at 400V.
Efficiency is IE2, 52.1%.
Power Factor is 0.62 when mains connected at 50Hz.
Set terminal box links 'three a-breast' for 230V 'Delta' connection.
Set terminal box links ‘two at one side’ for 400V 'Star' connection.
140mm Wide x 244mm Long x 188mm high overall in its IP55 enclosure.
Foot mount on 7mm holes at 112mm wide x 90mm centres 45mm back from shaft shoulder.
Shaft is 14mm dia x 30mm with 5mm wide key.
Terminal box for 2 x M20 Glands (one fitted) and terminals for M4 rings.
Weight is 6kg.
Rated at 40°C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor over-temperature protection.
Manufacturer Part Number is 0.1283TECAB3-IE2.
For Variable Speed Use:-
Part Time Output when Inverter powered is…
0.830Nm - 0.12kW (0.16Hp) x 1380rpm at 100Hz
1.107Nm - 0.12kW (0.16Hp) x 1035rpm at 75Hz
1.63Nm - 0.12kW (0.16Hp) x 690rpm at 50Hz
1.63Nm - 0.06kW (0.08Hp) x 345rpm at 25Hz
1.63Nm - 0.01kW (0.01Hp) x 69rpm at 5Hz
Continuous Output when Inverter powered is…
1.107Nm - 0.12kW (0.16Hp) x 1035rpm at 75Hz
1.63Nm - 0.12kW (0.16Hp) x 690rpm at 50Hz
1.411Nm - 0.05kW (0.06Hp) x 345rpm at 25Hz
0.830Nm - 0.006kW (0Hp) x 69rpm at 5Hz
Download the Dimensions and Technical Catalogue from the links below...