TEC Electric - 5.5kW 3ph 4 Pole High Efficiency Flange Mounting (B5) 132S Frame AC Motor for 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive or a fixed frequency mains supply at 50Hz.
Fixed mains supply output: 5.5kW (7.5HP) x 1450RPM at 400V x 50Hz 3ph.
Inverter Supply Output: 20:1 Speed Control range from 145RPM to 2900RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Full Load Current - 10.9A at 400V.
Power Factor is 0.83 when mains connected at 50Hz.
Efficiency is 87.9%
252mm Wide x 437mm Long x 318mm high overall in its IP55 enclosure.
Flange mount on 15mm holes at 265mm PCD with 230mm diameter spigot in the 300mm diameter flange.
Shaft is 38mm dia x 80mm with 10mm wide key.
Weight is 43kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Manufacturer Part Number is 5.543TECAB35-IE2. Previous Part Number was - TECA2-132S-4-B5
For Variable Speed use:-
Part Time Output when Inverter powered is...
18.11Nm - 5.5kW ( 7.37HP) x 2900 RPM at 100 Hz
36.22Nm - 5.5kW ( 7.37HP) x 1450 RPM at 50 Hz
36.22Nm -2.75kW ( 3.69HP) x 725 RPM at 25 Hz
36.22Nm - 0.55kW (0.74HP) x 145 RPM at 5 Hz
Continuous Output when Inverter powered is...
25.9Nm -4kW ( 5.36HP) x 2030 RPM at 70 Hz
36.22Nm -5.5kW ( 7.37HP) x 1450 RPM at 50 Hz
30.79Nm - 2.34kW ( 3.13HP) x 725 RPM at 25 Hz
18.11Nm - 0.28kW (0.37HP) x 145 RPM at 5 Hz
Download the full Manual and Dimensions from the links below:-
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.