TEC IE2 18.5kW Cast Iron Three Phase Motor 400V 6 Pole 200 Frame B3 IP65 Protection

TEC Electric - 18.5kW 3ph 6 Pole Cast Iron High Efficiency Foot Mounting (B3) 200L1 Frame AC Motor for 400V 3 phase supply.  Inverter Rated for use with a Variable Frequency Inverter Drive  or a fixed frequency mains supply at 50Hz.

Fixed mains supply output: 18.5kW (24.8HP) x 965RPM at 400V x 50Hz 3ph.
Inverter Supply Output: 14:1 Speed Control range from 96.5RPM to 1350RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.

Full Load Current:  34.75A at 400V.
Power Factor:  0.85 when mains connected at 50Hz.
Efficiency:  90.4%

Dimensions:  392mm Wide x 768.5mm Long x 500mm high overall in its IP65 enclosure.
Mounting:  Foot mount on 19mm holes at 318mm wide x 305mm centres 133mm back from the shaft shoulder.
Shaft:  55mm dia x 110mm with 16mm wide key.
Drive End Bearing:  Ball Bearing for a direct connected load.  Maximum Bearing Side Load is 5600N/4600N for Shoulder/end of the shaft extension and 20,000 bearing life.
Weight is 251kg.

Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Part number is - 18.563TECCB3-IE2/IP65

For Variable Speed use:-
Part Time Output when Inverter powered is...
91.5Nm - 18.5kW ( 24.8HP) x 1930 RPM at 100 Hz
183Nm -18.5kW ( 25HP) x 965 RPM at 50 Hz
183Nm -9.25kW ( 12.4HP) x 483 RPM at 25 Hz
183Nm - 1.85kW (2.48HP) x 97 RPM at 5 Hz
Continuous Output when Inverter powered is...
130Nm -18.5kW ( 24.8HP) x 1350 RPM at 70 Hz
183Nm -18.5kW ( 25HP) x 965 RPM at 50 Hz
155Nm - 7.86kW ( 10.54HP) x 483 RPM at 25 Hz
91.5Nm - 0.93kW (1.24HP) x 97 RPM at 5 Hz

Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.