TEC - 110kW 3ph 6 Pole high Efficiency AC Motor in IE2 315L frame for 400V 3 phase supply. Foot Mounting.
Totally enclosed to IP66 Upgrade.
Includes shaft mounted cooling fan, thermistor PTC 140C, Motor can be run via a softstarter (Insulated bearing NOT included this is a requirement when running with an inverter).
Fixed mains supply output is 110kW (150HP) x 980RPM at 400V x 50Hz 3ph.
Full Load Current - 198.08A at 400V.
Overload - 150% x 60seconds.
Efficiency is 94.3% at full load.
Power Factor is 0.85 when mains connected at 50Hz.
Full Load Torque: 1072Nm
Set terminal box links 'three a-breast' for 400V 'Delta' connection.
Set terminal box links ‘two at one side’ for 660V 'Star' connection.
DE Bearing : Roller NU319 C3 suitable for side loading within the bearings specification.
Allowed Radial Load 11800N
Allowed Axial Load 79300N
Overall length in its IP66 enclosure: 1385mm
Foot mounted on 4 off 28mm holes 508mm by 457mm 216 back from the motor shoulder
Weight is 1171.9kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Full part number is - 110.063TECCB3-IE2-IP66
Download the full Technical Catalogue from the link below...
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.