Vascat 0/29.8/29.8kW x 0/2034/3960RPM Square Frame AC Vector Test Rig Motor, foot mounting (B3) for 400V 3 phase supply.
132 Frame, Force Ventilated (IC06) to IP23.
Includes:- Insulated bearing at drive end, Shaft Grounding Ring at non drive end for speeds over 3000RPM, force cooling fan, intake filter and 2048ppr x 15V HTL Encoder.
For use with a Closed Loop AC Vector Drive having the encoder board option fitted for full closed loop vector control.
Continuous Output: 29.8kW.
Overload: 150% to S6 (40%) to 2930RPM, then reducing to no overload at 3690RPM.
Base Speed: 2034RPM.
Maximum Speed at Full Output: 3960RPM.
Torque to Base Speed: 140Nm.
Torque at Maximum Speed: 72Nm.
Full Load Current: 58.6A.
Voltage: 400V 3 Phase.
Supply Frequency: 69/134Hz at Base/Maximum Speed with Inverter drive switching frequency set not less than 20 x motor frequency for maximum operating speed.
Magnetising Current: 26.7A.
Overall Dimensions: 408mm Wide x 574mm Long x 555mm high overall.
Mounting: Foot mount on 12mm holes at 216mm wide x 235mm centres.
Weight: 130g.
Rotor Inertia: 0.061kgm2.
Shaft: 48mm diameter x 110mm from shoulder without keyway.
Drive End Bearing: Insulated Bearing for a direct connected load.
Bearing Protection: Insulated Bearing at Drive end and High Speed Low Friction bypass Brush (Aegis) fitted to non drive end.
Ambient Temperature: 40C at up to 1000m above sea level.
Cooling: Force Ventilation Fan with Intake Filter fitted at 0.37kW for 400V 3ph 50Hz supply at 1.11A.
Part number: MAC-QT 132 M 222- IM B3 OV17000411.
Download the MAC-QT-132M Dimension drawing and output curves from the link below...