TEC IE2 75kW Cast Iron 3ph AC Motor - 400V/690V 2 Pole 280S Frame, B3 Foot Mount, Force Cooling, Encoder

75.023TECCB3-IE2+FV+ENC

Order Code: 25870
Obsolete Product
This item is now obsolete. Alternatives may be available - see linked products below.

Brand: TEC Electric Motors, Range: TECC IE2 Three Phase Cast Iron

TEC Electric Motors 280S Frame 75kW 2 Pole Cast Iron High Efficiency AC Induction Motor for 400V or 690V 3 phase supply. Suitable for use with a Variable Frequency Drive or fixed-frequency mains supply at 50/60Hz. Includes Force Cooling Fan and 2048ppr Encoder.  Frame size 280S

Power Output: 75kW (100HP) at 50Hz
Speed: 2970RPM at 50Hz
Full Load Current: 129.3 at 400V
Power Factor: 0.87 (when mains connected at 50Hz)
Efficiency: 93%
Rated: 40°C Ambient.

Size: 550mm Wide x 1165mm Long x 680mm High
Shaft: Shaft is 65mm Diameter x 140mm Length with 18mm Key.
Mounting: Mount via 4 x 24mm holes on 457mm x 368mm centres, 190mm back from the shaft shoulder.
Weight: 580kg (approx).

Encoder specification is IH950/2400 R63/2048 24mm hollow shaft.

Force Cooling fan requires separate three phase 400V supply.

Set terminal box links 'three-a-breast' for 400V 'Delta' connection.
Ventilation space required at rear cooling air intake.

Full part number is - 75.023TECCB3-IE2+FV+ENC

You may also be interested in...

Photo of WEG CFW11 IP20 75kW/90kW 400V 3ph AC Inverter Drive, HMI, DBr, C3 EMC

WEG CFW11 IP20 75kW/90kW 400V 3ph AC Inverter Drive, HMI, DBr, C3 EMC

CFW11 0180 T 4 O DB Z

(11129079)

Order code: 22581

10+ in stock

£4,411.26
1+
Photo of WEG ENC-01 Encoder Feedback Card with Signal Repeater for CFW11 (Slot 2)

WEG ENC-01 Encoder Feedback Card with Signal Repeater for CFW11 (Slot 2)

ENC-01

Order code: 23392

2 in stock

3+ normally 15 weeks

£110.18
1+