TEC IE2 75kW Cast Iron 400V 6 Pole AC Motor B3 Foot Mount 315S with Force Vent and 2048ppr Encoder

75.063TECCB3-IE2-ENC-FV (TECC-315S-6 B3)

Order Code: 33609
Photo of TEC IE2 75kW Cast Iron 400V 6 Pole AC Motor B3 Foot Mount 315S with Force Vent and 2048ppr Encoder
Obsolete Product
This item is now obsolete. Alternatives may be available - see linked products below.

Brand: TEC Electric Motors, Range: TECC IE2 Three Phase Cast Iron

TEC Electric Motors 315S Frame 75kW 6 Pole Cast Iron High Efficiency AC Induction Motor for 400V or 690V 3 phase supply. Suitable for use with a Variable Frequency Drive or fixed-frequency mains supply at 50/60Hz. Includes Force Ventilation Fan, Thermistors and 2048ppr encoder

Power Output: 75kW (100HP) at 50Hz
Speed: 980RPM at 50Hz
Full Load Current: 135.92 at 400V
Power Factor: 0.85 (when mains connected at 50Hz)
Torque:  730Nm.
Efficiency: 93.7%
Rated: 40°C Ambient.

Size: 635mm Wide x 1215mm Long (without the extended cowl) x 845mm High
Shaft: Shaft is 80mm Diameter x 170mm Length with 22mm Key.
Mounting: Mount via 4 x 28mm holes on 635mm x 406mm centres, 216mm back from the shaft shoulder.
Weight: 870kg.

Encoder: IH950/2400 R63/2048 24mm hollow shaft. 2048ppr
Force Cooling Fan: for three phase 230V or 400V supply at 50Hz.
Ventilation space required at rear cooling air intake.

Full part number is - 75.063TECCB3-IE2-ENC-FV (TECC-315S-6 B3)

From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.