Parker SSD 5703-2 unit to provide the facility to run a line of drives in speed-lock (Sometimes refered to as Peer to Peer control).
Commonly fitted to 590P and 690P drives. Requires Fibre Optic cable and RS232 cable connections, see linked items below.
Level of Protection : IP20
Weight : 100 g
Dimension : H:127 mm W:22 mm D: 152 mm
Mounting : Din rail mounting (symmetric and asymmetric)
Supply : - by the 4 ways cable R232 (1&2) 60 cm MAX
Module Current: 79 mA max (all the I/O active)
Fuse: 160 mA 250V Fast
Connector type : Fast less crimping Serial:HFBR453X(HP)
Number of connector : 3 connectors (1 input, 2 outputs) see configuration
Wavelength of signal : 660 nm (Red visible)
Length of fibre between two module : 40 centimeters to 25 meters
Type of Connector : RS232 (female) for male connector RJ11
Type of signal : RS232 Bi directional 2400 to 38000 bit/s
Temperature : -10 °C to +60° C
Humidity : 10 to 90% non condensating
Part number: 5703-2 - Replaces 5703-1 obsoleted product (Also known as ( PVD 3642-EN )
Manufacturer is Parker Hannifin SSD Drives Division, previously known as SSD Drives, Eurotherm Drives and Shackleton System Drives.
Download the technical manual attached 5703-2 Installation Guide ( IA387648C225)