Dynamic Brake Resistor, 7 Ohms 18000 Watts

Dynamic Braking Resistor rated at 7 Ohms x 18,000 Watts continuous. Tolerance ±5%.

Wire wound CR/AL (Chrome Aluminium)
Maximum Power: 18kW continuous. 180kW Peak.
7Ω @ 20ºC
Braking Time: 10s

Nominal Voltage: 1000V AC/DC
Max operating voltage: 3000 DC or VC rms
Peak Voltage: 3000V
Dielectric Strength @50Hz x60 sec: 3500 Vrms
Temperature switch (KL): Normally closed contact, opens at ~160ºC+/-5ºC, re-closes at ~140ºC+/-5ºC. Voltage: 250VAC rms. / Current: 10AAC rms / 6.35mm male faston connection
Maximum input voltage for the temperature switch: 250V AC
Maximum input current for the temperature switch: 10A 
Connection terminal for power cable: M10

Cabinet model: SI/MOD2/5 (Galvanised (Stainless steel as option))
Size: 570 Long x 430 Wide x 410mm high with mesh cover (excluding terminal cover).
Horizontal mount only permitted
Enclosure Rating: IP23 when mounted (Open to rear).
Net Weight: 20kg.

Max overload = 10 times Overload
Time to Max Temperature at full load 40 min.

Manufacturers description: RE/ 7R 18000W (Reference 2375SI7RW18000 (SI/MOD2/5))

Klixon over-temperature protection included.