Dynamic Brake Resistor, 60 Ohms, 1500 Watts

Dynamic Braking Resistor rated 60 Ohms x 1500 Watts (1.5kW).
Application: When connected to a suitable Inverter drive this will add braking to the drive system, by absorbing energy returning from the load.

Overload: 10 times Power for 5 seconds every 90 seconds.
Maximum Overload:  Limited by the brake chopper Voltage to 2.4W for 230V Drives, or 9.3kW for 400V Drives.
Time to Maximum Temperature: 30 minutes at full load.
Tolerance ±5%. 
Nominal Voltage: 1000V AC/DC.
Peak Voltage: 3000V.

Dimensions: 430mm x 80mm x 136mm high including mesh cover (excluding terminal cover).
Enclosure: IP20 when mounted (Open to rear).
Weight: 1.96kg.

Klixon over-temperature protection included.

Download the technical details from the link below.