Dynamic Brake Resistor, 30 Ohms x 6000 Watts

Dynamic Braking Resistor, 30 Ohms x 6000Watts (6kW).
Application: When connected to a suitable Inverter drive, this will reduce the stop time by absorbing energy returning from the load.

Overload: 460% for 10 seconds every 100 Seconds, or as shown in the data sheet linked below.
Maximum Overload:  Limited by the brake chopper Voltage to 4.3kW for 230V Drives, or 17kW for 400V Drives.
Tolerance:  +-5%.
Nominal Voltage: 1000V AC/DC.
Peak Voltage: 3000V.

Dimensions: 500mm Long x 195mm high x 388mm wide with mesh cover and internal connections.
Thermal sensor included is set at 250 degrees C.
Enclosure: IP20.
Weight: 5.4Kg.

Part Number:  ES4-30R-SB