Dynamic Brake Resistor, 1000 Ohms, 200 Watts

Dynamic Braking Resistor, 1000 Ohms x 200 Watts (0.2kW). 
Application: When connected to a suitable Inverter drive, this will reduce the stop time by absorbing energy returning from the load.

Overload:  10 x Power for 5 seconds every 25 seconds, when mounted onto a suitable heatsink.
Maximum Overload:  Limited by the brake chopper Voltage to 72W for 230V Drives, or 280W for 400V drives.
Tolerance:  +-5%.
Dielectric Strength:  1.5kV.
Insulation Resistance:  20 MegOhm minimum..

Dimensions: 160mm Long x 58mm High x 28mm Wide.
Fixings: Via 2 x 4.3mm Diameter holes at 150mm centres.
Connections: 0.5m flying leads.

RoHS Compliant to 2011/65/EU RoHS.
Place of Manufacture:  South Korea.
Commodity Code:  85333900

Manufacturers Part Number:  IRV 200 1K J