Dynamic Brake Resistor, 33 Ohms, 1000 Watts

33 Ohms x 1000 Watts (1kW) ynamic Braking Resistor with terminal cover and thermal trip.
Application: When connected to a suitable Inverter drive, this will reduce the stop time by absorbing energy returning from the load.

Overload: 460% for 10 seconds every 100 Seconds, or as shown in the data sheet linked below.
Maximum Overload:  Limited by the brake chopper Voltage to 4.3kW for 230V Drives.
Tolerance: -0 +5%.
Voltage: 1000V DC or AC rms.

Enclosure: IP20 when mounted (Open to rear).
Dimensions: 367mm x 141mm high x 121mm wide with mesh cover.
Mounting: Via 4 x holes on 315mm by 92mm centres.
Weight: 1.8kg.

Thermal sensor has a normally closed contact opening at 250ºC and closing at 210ºC.

Part Number:  EST-33R-SB

See ES data sheet linked below.