Dynamic Brake Resistor, 20 Ohms, 1000 Watts

Dynamic Braking Resistor rated at 20 Ohms x 1000 Watts (1kW) continuous rated at 1000V DC or AC rms Tolerance 0-5%. When connected to a suitable Inverter drive, this will reduce the stop time by absorbing energy returning from the load.

Dimensions: 367 x 121 x 315mm high with mesh cover.
Enclosure Rating: IP20 when mounted (Open to rear).
Weight: 1.8kg.

Thermal sensor normally closed contact opens at 250C and closes at 210C

Mounting: Via 4 x M6 at 236mm by 92mm

Rating can be exceeded when applied power is lees than 100% of the time.
See power multiplier information attached for ES range 

Part Numbe:  EST-20R-SB

See ES data sheet attached