Sprint PL400TEMV 400kW 950A 2Q 12V to 600V 3ph AC to DC Converter

Sprint Electric PL Series (Frame 4) - 950A 2 Quadrant DC Thyristor Drive for 12-600V Supply with 110V or 230V Control supply (universal). Regenerative stop Included on this model
Typical Motor output - up to 400kW (540HP) at 460V DC for motor speed and torque control.

Power Cable Entry: Mains Input = Top, Armature Output = Top, 3 Phase Auxiliary = Middle for this model

4 Navigation keys
Simple to set-up in Digital, fully-isolated 2 Quadrant form and ready to run from its 'Quick Set-Up' settings.
Frame Size 4 - 253mm Wide x 350mm Deep x 757mm High.

Terminals include:-
8 x Analogue Inputs (Selectable Voltage Range +/-/5/10/20/30V).
4 x Analogue Outputs (3 x Programmable).
4 x Digital Inputs – 2 Selectable as Encoder Quadrature Inputs.
4 x Digital Inputs/Outputs – Programmable as outputs
3 x Digital Outputs.
+ & - 10V @10mA Voltage Reference for potentiometers.
Internal Armature Voltage AVF (ARM) Feedback, Tacho and Encoder (2 wire quadrature) included as standard.
Serial comms RS232 port Fitted, ANSI-X3.28-2.5-B I multi-drop. Available Fieldbus options. Profibus, Devicenet. Ethernet using Driveweb technology, Please add

Input Current - 0A for Armature + up to 32A to 50A for Field.
Input Voltage – 12V to 600V three phase +-10% at 50/60Hz.
Input fuse – 1100A - to suit input bridge at 1304000A²s
Note. The 3 phase Field and Armature supplies are input through separate terminals and may be at different levels if desired.
Use a choke in the supply at 0uH @ 760A

Ventilation: Force Vented
Fan Supply source: 100VA 240V 50/60Hz

Rated at 40C Ambient.
Ventilation space above - 200mm.
Ventilation space below - 200mm.
Ventilation space at sides - 0mm.
Heat Loss at max output - 2500W.
Panel mount with M8 screw fixings on 680mm x 150mm centers..

Full part number is PL400TEMV

Download the Technical product Manual from the link below...