Parker SSD Drives 590P Series 180A Four Quadrant DC Thyristor Drive for 400V Supply with 110V Control supply. Converts a three phase AC supply to DC, for speed and torque control of a DC motor.
Typical Motor output, up to 75kW (100HP) at 460V DC for fully regenerative DC motor speed and torque control.
Simple to set-up in Digital, fully-isolated Four Quadrant form.
Dimensions: 250mm Wide x 180mm Deep x 485mm High.
Terminals include:-
5 x Analogue Inputs (4 x Configurable).
3 x Analogue Outputs (2 x Configurable).
Internal Armature Voltage Feedback.
10 x Digital inputs - 5 are Configurable including two as encoder inputs for a second or line encoder.
3 x Digital Outputs (all Configurable).
+ & - 10V for Potentiometers.
Input Current: 148A for Armature + up to 10A for Field.
Input Voltage: 380V/415V/440V/460V three phase +-10% at 50/60Hz via 200A High-Speed back-up fuses.
Ambient Temperature: Rated at 40C.
Ventilation space above: 150mm.
Ventilation space below: 100mm.
Ventilation space at sides: 0mm (bars are left side).
Heat Loss: 570W at maximum output.
Mounting: Panel mount with M6 screw fixings on 400 x 200mm centres.
Part Number: 590P-53318031-P00-U0V0. Was: 590P-0180-500-0010-UK-ARM-0-110-0, Exactly the same as Eurotherm Drives 590P-0180-500-0010-UK-ARM-0-110-0.
Replaces:-
SSD and Eurotherm Drives 590C-0180 digital, 590A-0180 and 545-1800 analogue products. Requires external back-up high speed fuses.
Please note: This item will be supplied with an operator keypad.
Download the 590P Technical Product Manual from the Link below...