SSD Drives 590P Series - 1200A Four Quadrant DC Thyristor Drive for 400V to 480V Supply with universal 115-230V 1ph Control circuit.
Typical Motor output - up to 500kW (670HP) at 460V DC, for fully regenerative DC motor speed and torque control.
Simple to set-up in Digital, fully-isolated Four Quadrant form.
850mm Wide x 417mm Deep x 1406mm High.
Terminals include:-
5 x Analogue Inputs (4 x Configurable).
3 x Analogue Outputs (2 x Configurable).
Tacho input (or internal AVF) Feedback.
10 x Digital inputs - 5 are Configurable including two as encoder inputs for a second or line encoder.
3 x Digital Outputs (all Configurable).
+ & - 10V for Potentiometers.
Input Current - 984A for Armature + up to 60A for Field.
Input Voltage - 380V/415V/440V/460V three phase +-10% at 50/60Hz.
Control supply at 115-230V single phase is required for; electronics, pilot for main contactor and 177W cooling fan, flc is 1.7A.
Rated at 40C Ambient.
Ventilation space above - not applicable for roof mounted fan.
Ventilation space below - 210mm or choke space.
Ventilation space at sides - 0mm.
Heat Loss at max output - 2580W.
Panel mount with M8 screw fixings on 680 x 150mm centres.
Full part number is 590P-534120H0-P00-U4A0. Was 590P-1200-500-0011-UK-AN-0-0-0, Exactly the same as Eurotherm Drives 590P-1200-500-0011-UK-AN-0-0-0.
Includes 6 x pairs of 350A high speed limb internal (arm) fuses.
(Thyristor I*t = n/a)
Download the 590P full Manual from the link below...