Parker SSD Drives 591P Series 15A Single or Two Quadrant DC Thyristor Drive for 400V Supply with 110V or 230V Control supply. Converts a three phase AC supply to DC for speed and torque control of a DC motor.
Typical Motor Output: up to 6kW (8HP) at 460V DC for DC motor speed and torque control.
Keypad and analogue Tachogenerator feedback board are included.
Simple to set-up in Digital, fully-isolated Single or Two Quadrant form.
Dimensions: Size 1 200mm Wide x 220mm Deep x 375mm High.
Terminals include:-
5 x Analogue Inputs (4 x Configurable).
3 x Analogue Outputs (2 x Configurable).
Tacho input (or internal AVF) Feedback.
10 x Digital inputs - 5 are Configurable including two as encoder inputs for a second or line encoder.
3 x Digital Outputs (all Configurable).
+ & - 10V for Potentiometers.
Input Current: 12.3A for Armature + up to 4A for Field.
Input Voltage: 220V to 500V +-10% at 50/60Hz (for use on 220V/230V/240V/380V/415V/440V/460V/480V three phase main supplies).
Input Fuse: 25A, to suit input bridge at 720A²s.
Use a choke in the supply at 50uH minimum.
Ambient: Rated at 40C.
Ventilation space above: 100mm.
Ventilation space below: 100mm.
Ventilation space at sides: 0mm.
Heat Loss: 57W at maximum output.
Mounting: Panel mount via M6 screw fixings on 360 x 140mm centres.
Part Number: 591P-53215010-P00-U4A0. Legacy Part Number: 591P-0015-500-0011-UK-AN-0-0-0, exactly the same as Eurotherm Drives 591P-0015-500-0011-UK-AN-0-0-0. Use this product for code 591P-53215010-P00-U4V0 (591P-0015-500-0011-UK-AVF-0-0-0) and change the feedback option to 'AVF' for Armature Voltage Feedback as speed measurement.
Download the 590P technical product manual from the link below...