Parker SSD Drives 590P Series - 40A Four Quadrant DC Thyristor Drive for 110V to 220V Supply with 110V or 230V Control supply.
Typical Motor output - 9kW up to 40A at 110V to 250V DC for fully regenerative static reversing DC motor speed and torque control.
Keypad 6901 Fitted
Simple to set-up in Digital, fully-isolated Four Quadrant form.
Size 2 - 200mm Wide x 292mm Deep x 434mm High.
Terminals include:-
5 x Analogue Inputs (4 x Configurable).
3 x Analogue Outputs (2 x Configurable).
Internal AVF Feedback. Tacho Feed=back card can be selcted below
10 x Digital inputs - 5 are Configurable including two as encoder inputs for a second or line encoder.
3 x Digital Outputs (all Configurable).
+ & - 10V for Potentiometers.
Field supply - 10A x up to 90% of AC supply value (Current or Voltage controlled)
Input Current - 33A for Armature + up to 10A for Field.
Input Voltage - 110V to 220V three phase +-10% at 50/60Hz.
Input fuse - 80A or lower to suit input bridge at 15,000A²s
Use a choke in the supply at 50uH minimum.
Rated at 40C Ambient.
Ventilation space above - 161mm.
Ventilation space below - 100mm.
Ventilation space at sides - 0mm.
Heat Loss at max output - TBA
Panel mount with M6 screw fixings on 418 x 140mm centres.
Full part number is - 590P-23240020-P00-U4V0. Was - 590P-0040-220-0011-UK-ARM-0-0-0, Exactly the same as Eurotherm Drives 590P-0040-220-0011-UK-ARM-0-0-0.
Replaces:-
SSD and Eurotherm Drives Low Voltage option 590C-0035 digital, 590A-0040 and 545-0350 analogue products. Requires external back-up high speed fuses.
Download the 590P Technical product Manual from the link below...