Parker SSD Drives 590P Series 35A Four Quadrant DC Thyristor Drive for 400V Supply with 110V or 230V Control supply. Converts a three phase AC supply to DC for speed and torque control of a DC motor.
Typical Motor output: up to 15kW (20HP) at 460V DC for fully regenerative DC motor speed and torque control.
Keypad included.
Simple to set-up in Digital, fully-isolated Four Quadrant form.
Dimensions: Size 1, 200mm Wide x 220mm Deep x 375mm High.
Terminals include:-
5 x Analogue Inputs (4 x Configurable).
3 x Analogue Outputs (2 x Configurable).
Internal Armature Voltage Feedback.
10 x Digital inputs - 5 are Configurable including two as encoder inputs for a second or line encoder.
3 x Digital Outputs (all Configurable).
+ & - 10V for Potentiometers.
Input Current: 28.7A for Armature + up to 4A for Field.
Input Voltage: 220V to 500V +-10% at 50/60Hz (for use on 220V/230V/240V/380V/415V/440V/460V/480V three phase main supplies).
Input fuse: 40A - to suit input bridge at 720A²s
Use a choke in the supply at 50uH minimum.
Ambient Temperature: Rated at 40C.
Ventilation space above: 100mm.
Ventilation space below: 100mm.
Ventilation space at sides: 0mm.
Heat Loss: 117W at maximum output.
Mounting: Panel mount with M6 screw fixings on 360 x 140mm centres.
Part number: 590P-53235010-P00-U4V0. Was 590P-0035-500-0011-UK-ARM-0-0-0, exactly the same as Eurotherm Drives 590P-0035-500-0011-UK-ARM-0-0-0.
Replaces:- SSD and Eurotherm Drives 590C-0035 digital, 590A-0035 and 545-0350 analogue products. Requires external back-up high speed fuses.
Download the 590P technical product manual from the link below...