Parker SSD 590P Series 70A Four Quadrant DC Thyristor Drive for 400V Supply with 110V or 230V Control supply (universal). Converts a three phase AC supply to DC for speed and torque control of a DC motor.
Typical Motor output, up to 28.5kW (38HP) at 460V DC for fully regenerative motor speed and torque control.
Includes Analogue Tachogenerator feedback board.
Simple to set-up in Digital, fully-isolated Four Quadrant static Reversing form and ready to run from its 'Quick Set-Up' settings.
Dimensions: Frame Size 2, 200mm Wide x 292mm Deep x 434mm High.
Terminals include:-
5 x Analogue Inputs (4 x Configurable).
3 x Analogue Outputs (2 x Configurable).
Tacho input (or internal AVF) Feedback.
10 x Digital inputs, 5 are Configurable including two as encoder inputs for a second or line encoder.
3 x Digital Outputs (all Configurable).
+ & - 10V for Potentiometers.
Input Current: 58A for Armature + up to 10A for Field.
Input Voltage: 220V to 500V +-10% at 50/60Hz (for use on 220V/230V/240V/380V/415V/440V/460V/480V three phase main supplies).
Input fuse: 80A - to suit input bridge at 8000A²s
Use a choke in the supply at 50uH minimum
Ambient Temperature: Rated at 40C.
Ventilation Space: 160mm above, 100mm below, 0mm at sides.
Heat Loss: 234W at maximum output.
Mounting: Panel mount with M6 screw fixings on 418 x 140mm centres.
Part number: 590P-53270020-P00-U0A0. Legacy part number is 590P/0070/500/0010/UK/AN/0/0/0. Exactly the same as Eurotherm Drives branded product bearing the same part number. Use this product for code 590P-53270010-P00-U0V0 and change the feedback option to 'AVF' for Armature Voltage Feedback as speed measurement.
Replaces:- SSD and Eurotherm Drives 590C-0070, 590A-0070, 545-0700 analogue products. Requires external back-up high speed fuses.
Please note: This item will be supplied with an operator keypad.
Download the 590P Technical Product Manual from the link below...