Parker SSD Drives 590P Series - 35A Four Quadrant DC Thyristor Drive for 110V to 220V Supply with 115V or 230V Control supply.
Typical Motor output - up to 7kW (9.4HP) at 220V DC for fully regenerative DC motor speed and torque control.
Analogue Tachogenerator feedback board is included.
Simple to set-up in Digital, fully-isolated Four Quadrant form.
Size 1 - 200mm Wide x 220mm Deep x 375mm High.
Terminals include:-
5 x Analogue Inputs (4 x Configurable).
3 x Analogue Outputs (2 x Configurable).
Tacho input (or internal AVF) Feedback.
10 x Digital inputs - 5 are Configurable including two as encoder inputs for a second or line encoder.
3 x Digital Outputs (all Configurable).
+ & - 10V for Potentiometers.
Input Current - 28.7A for Armature + up to 4A for Field.
Input Voltage - 110V to 220V +-10% three phase at 50/60Hz.
Input fuse - 40A - to suit input bridge at 720A²s
Use a choke in the supply at 50uH minimum.
Rated at 40C Ambient.
Ventilation space above - 100mm.
Ventilation space below - 100mm.
Ventilation space at sides - 0mm.
Heat Loss at max output - 117W.
Panel mount with M6 screw fixings on 360 x 140mm centres.
Full part number is 590P-23235010-P00-U0A0 . Was 590P-0035-220-0010-UK-AN-0-0-0, exactly the same as Eurotherm Drives 590P-0035-220-0010-UK-AN-0-0-0. Use this product for code 590P-23235010-P00-U0V0 and change the feedback option to 'AVF' for Armature Voltage Feedback as speed measurement.
Replaces:- SSD and Eurotherm Drives 590C-0035 digital, 590A-0035 and 545-0350 analogue products. Requires external back-up high speed fuses.
Please note: This item will be supplied with an operator keypad.
Download the 590P technical product manual from the link below...