SSD Drives 590P Series 500A Single or Two Quadrant DC Thyristor Drive for 400V Supply with 115V Control supply.
Typical Motor output: up to 210kW (275HP) at 460V DC for DC motor speed and torque control.
Size: 253mm Wide x 358mm Deep x 700mm High.
Terminals include:-
5 x Analogue Inputs (4 x Configurable).
3 x Analogue Outputs (2 x Configurable).
Tacho input (or internal AVF) Feedback.
10 x Digital inputs - 5 are Configurable including two as encoder inputs for a second or line encoder.
3 x Digital Outputs (all Configurable).
+ & - 10V for Potentiometers.
Input Current: 410A for Armature + up to 30A for Field.
Input Voltage: 380V/415V/440V/460V three phase +-10% at 50/60Hz.
Control supply: 115V single phase for; electronics, pilot for main contactor and 130W cooling fan.
Rated at 40C Ambient.
Ventilation space above: 200mm.
Ventilation space below: 210mm.
Ventilation space at sides: 0mm.
Heat Loss at max output: 1590W.
Panel mount with M8 screw fixings on 680 x 150mm centres.
Supplied as the 591P and a separate plug-on tacho-generator feedback board. The 591P is factory set for Armature Voltage Speed Feeback. Change the feedback options to 'Tacho' from the set-up menu.
Manufacturers part number: 591P-53350041-P00-U4A0. Was 591P-0500-500-0011-UK-AN-0-115-0, Exactly the same as Eurotherm Drives 591P-0500-500-0011-UK-AN-0-115-0. Use this to replace the 595-4500.
Requires external back-up high speed fuses, see linked the products linked below.
Download the 590P and 591P Product Technical and Installation Manual from the link below:-