SSD Drives 590P Series - 725A Four Quadrant DC Thyristor Drive for 400V Supply with 230V Control supply.
Typical Motor output - up to 300kW (400HP) at 460V DC for fully regenerative DC motor speed and torque control. Includes Airflow kit.
Simple to set-up in Digital, fully-isolated Four Quadrant form.
253mm Wide x 358mm Deep x 700mm High.
Note this unit is not supplied with an airflow kit, this can be selected below
Terminals include:-
5 x Analogue Inputs (4 x Configurable).
3 x Analogue Outputs (2 x Configurable).
Armature Voltage Feedback
10 x Digital inputs - 5 are Configurable including two as encoder inputs for a second or line encoder.
3 x Digital Outputs (all Configurable).
+ & - 10V for Potentiometers.
Input Current - 595A for Armature + up to 30A for Field.
Input Voltage - 380V/415V/440V/460V three phase +-10% at 50/60Hz.
Control supply at 230V single phase is required for; electronics, pilot for main contactor and 140W cooling fan.
Rated at 40C Ambient.
Ventilation space above - 200mm.
Ventilation space below - 210mm.
Ventilation space at sides - 0mm.
Heat Loss at max output - 2265W.
Panel mount with M8 screw fixings on 680 x 150mm centres.
Full part number is 590P-53372542-P00-U4V0. Was 590P-0725-500-0011-UK-ARM-0-230-0, Exactly the same as Eurotherm Drives 590P-0725-500-0011-UK-ARM-0-230-0.
Replaces:-
SSD and Eurotherm Drives 590C-0720 digital, 590A-0720 and 550-720 analogue products. Requires external back-up high speed fuses.
View alternatives - search for 725A DC.