ABB DCS880 350A 4Q 100V to 525V 3ph AC to DC Converter

ABB DCS880 Series 350A 4 Quadrant Regenerative DC Thyristor Drive and Field Controller for 100V to 525Vac Supply.

Output Current: 350A Continuous.
Overload: 150% x 60 seconds every 15 minutes.
Typical Motor Output: Up to 150kW (200HP) at 460V DC for motor speed and torque control.

Dimensions: Frame Size H3: 460mm high x 270mm wide x317mm deep.
Weight: 25kg.

Terminals include:-
3 x Analogue Inputs (Selectable -20mA to 20mA, +/- 10V (11Bit +sign).
2 x Analogue Outputs (Selectable 0 to 20mA, 0 to 10V).
6 x Digital Inputs – Sink/ource, 1  can be used for PTC.
2 x Digital Inputs/Outputs – Programmable as outputs or pulse input/outputs.
3 x Relay Outputs.
Safe Torque Off (XSTO) anMain Contactor Shutdown (XSMC).
Drive to Drive Link (XD2D) and Built in Modbus EIA-485.
Encoder Differential or Single ended.
Tacho feedback included 5V +/- 8 to 270Vdc.
Input Output extention models and communications options are linked below or are available on request.

Input Current: 431A for Armature + up to 30A for Field.
Input Voltage: 100V to 480V three phase +-10% at 50/60Hz. +/- 15% short duration.
Input Fuse: 500A x High Speed Thyristor protection.
Input Choke: 1% to 4% line choke is required. ABB line chokes N408(1%) or ND408(4%).

Auxiliary Supply: 115V or 230V single phase for electronics and 230V single phase for the Fan Supply.

Part number: DCS880-S02-0350-05.

Download the Technical Product Manual from the link below.