Parker SSD Drives 590C (Old Type) Series - 70A Four Quadrant DC Thyristor Drive for 415V Main Supply with 110V Control circuit.
Typical Motor output - up to 28.5kW (38HP) at 460V DC for fully regenerative DC motor speed and torque control.
Keypad and analogue Tachogenerator feedback board are included.
Simple to set-up in Digital, fully-isolated Four Quadrant form.
Size 1 - 250mm Wide x 180mm Deep x 415mm High. IP00.
Terminals include:-
5 x Analogue Inputs (4 x Configurable).
2 x Analogue Outputs (2 x Configurable).
Tacho input (or internal AVF) Feedback.
5 x Digital inputs (3 x Configurable).
3 x Digital Outputs (all Configurable).
+ & - 10V for Potentiometers.
Input Current - 70A for Armature + up to 10A for Field.
Input Voltage - 415V 3 phase +-10% at 50/60Hz.
Input fuse - 80A - to suit input bridge at 8,000A²s
Use a choke in the supply at 50uH minimum.
Rated at 40C Ambient.
Ventilation space above - 100mm. Ventilation space below - 100mm. Ventilation space at sides - 0mm.
Heat Loss at max output - 210W.
Panel mount with screw fixings on 400 x 200mm centres.
Manufacturer Part Number is 590C/0700/6/0/0/1/0/00.
Interchangeable with 590C-0700-3-0-0-1-0-00-000, 590C-0700-4-0-0-1-0-00-000, 590C-0700-5-0-0-1-0-00-000, 590C-0700-7-0-0-1-0-00-000, 590C-0700-8-0-0-1-0-00-000, 590C-0700-9-0-0-1-0-00-000, and 590C-0700-A-0-0-1-0-00-000. 590C-0700-3-1-0-1-0-00-000, 590C-0700-4-1-0-1-0-00-000, 590C-0700-5-1-0-1-0-00-000, 590C-0700-6-1-0-1-0-00-000, 590C-0700-7-1-0-1-0-00-000, 590C-0700-8-1-0-1-0-00-000, 590C-0700-9-1-0-1-0-00-000, and 590C-0700-A-1-0-1-0-00-000. Exactly the same as Eurotherm Drives 590C part numbers.
Use 590P-0070-500-0011-UK-AN-0-0-0 to replace this unit.
Requires external back-up high speed fuses.
Download the 590C technical product manual from the link below:-