Sprint 3600XRi/8/LN 8A 4Q 115V/230V 1ph AC to DC Isolated Signals 001

Sprint Electric 3600XRi/8/LN - 8A Four Quadrant (Regenerative) Isolated DC Thyristor Drive for motor speed and torque control.
240V AC supply - 1.1kW (1.5HP) at 180V DC.
115V AC supply - 0.55kW (0.75HP) at 90VDC.
(Low voltage variants are available see links below)

Size: 200mm Wide x 70mm Deep x 175mm High. IP00
Weight: 1.75Kg

001 - includes optional isolated auxiliary terminals 51 to 70.

Adjustments:-
Max & Min Speed
Forward and reverse ramp times
Positive and negative I current clamps
Stability
Adjustable IR compensation for improved AVF speed regulation
Switch selectable Tacho or Armature voltage feedback
2Q/4Q selectTorque or speed control selectStall level
Selectable dual voltage ac supply
+/- 24V and 12V supllies 24ma and 10ma rated respectively
Aux speed trim input +ve and –ve
Aux Inverted speed trim input +ve and –ve
Aux setpoint, speed and ramp analogue outputs
Aux stop/start for stall condition
Aux speed input for non start selected condition
Zero speed or Stall relay volt free changeover contact
Auxiliary stall, zero and reverse speed external relay drivers
Run inhibit Note  Field and power terminals remain live . (RUN must not be relied on during hazardous operations)

Input Current: 8A to 12A (depending on motor inductance).
Input Voltage: 115V or 240V single phase +-10% at 50/60Hz.
Field Rating: 2A @ 90% input voltage (For half wave field volts 45% input voltage, connect field to F- and N)
Armature Form Factor: Typical form factor 1.5 (load dependant).
Stall protection @ 150% for 30 seconds included

Wall mount in clean environment or cubicle mount.
Rated at -10° to 40°C Ambient.
Heat Loss at Max output: 25W.
Mounting via 2 x M5 by 35mm @ 165mm.

Manufacturer part number is 3600XRi/8/LN-001

Download the Sprint 3600XRi manual below:-