WEG Automation CWM Series Three Pole Contactor to 9A (AC3) or 25A (AC1) for a Power Circuit to be switched by a 24V DC Control Circuit.
Rating:-
- Motor DOL Starter (AC3): 9A for a 4kW motor x 400V.
- Inverter or DC Thyristor Drive supply (AC1 - Thermal): 25A for up to 11kW x 400V.
Dimensions: Size 1 45mm Wide x 115mm Deep x 81mm High.
Auxiliary Contacts (when fitted):-
- Front-mounting external Auxiliary Contact adds 29mm to depth when fitted.
- Side-mounting external Auxiliary Contact adds 11.5mm to width when fitted.
Mounting: onto 35mm DIN rail, or 4 x 4.5mm slots at rear on 35mm x 50-72.5mm centres.
Terminals: Screw type, M3.5 Flat / Philips. Max 6mm².
Weight: 0.36kg.
Enclosure Rating: IP20.
Current Rating: 9A (AC3), or 25A (AC1).
Maximum Voltage: 690V 50/60Hz 1-3 Phase.
Coil Voltage: 24V DC 50/60Hz x 69.5VA (pull-in), 4-7.2VA (sealing).
Main Contacts: 3 (NO).
Auxiliary Contacts: 1 x Normally Closed. Optional 4 x additional external auxiliary contacts, see linked products below.
Standards: IEC/EN 60 947. DIN VDE 0660. UL. CSA
Lifespan (Electrical): 1,600,000 operations.
Lifespan (Mechanical): 10,000,000 operations.
Note:-
- AC1 Current Rating is for use with applications where open and closing operations are current free and the Current rating is not exceeded at any time.
- AC3 kW Rating is based on standard 2 pole or 4 pole motors.
- Coil connections can be made at either the top or bottom of the contactor to simplify replacement of existing contactors.
Part Number: CWM9-01-30C03 .(10535682)
Download full dimensional drawings for the WEG CWM range from the link below:-