Motortronics 4MC Gold Card 3MC Replacement - AP6200G-3R

Fairford 4MC Gold Card 3MC/3MC  Replacement. (Spares)

Additional information will be required to ensure compatibility. When placing your order please provide as much of the following information as possible:-

1. The model number of the Fairford/Motortronics Soft Starter the card will be installed in.
2. The serial number of the Fairford/Motortronics Soft Starter the card will be installed in.
3. The reference etched onto the PCB itself - this normally has an FD prefix followed by 5 or 6 numbers.
4. The full load current from the motor nameplate that the Soft Starter will be used with.

Mains Supply 230 - 460V 3 Phase +10% / -15%
Mains frequency 50 or 60Hz +/- 2Hz
Control Supply 9 - 12V AC (15VA) +/- 10%
Control Inputs Volt free contact
Control Frequency 50 or 60Hz +/- 2Hz

Outputs
Three relays N/O rated at 8A 250V AC1
1 Green LED indicating power to the PCB
1 Yellow LED indicating state of relay 1 Default: Run Relay
1 Yellow LED indicating state of relay 2 Default: Ramp complete
1 Yellow LED indicating state of relay 3 Default: Alarm(4MC) Run (3MC)
1 Yellow LED indicating state of Stop / Soft Stop Input
1 Red LED indicating a Current limit is active* (4MC)

RV1 Current limit level 0.5-5.5 FLC (4MC)
RV2 Stop time 0-240 seconds
RV3 Start time 0-240 Seconds

Manfacturer part number AP6200G-3R.