Siemens SINAMICS PM240 Power Module for 90kW (125HP) 400V Three Phase Motor to 178A at High Overload or 110kW (150HP) to 205A when Fan/Pump rated. Converts fixed frequency three phase 400V Input to variable frequency three phase 400V for speed and torque control of a standard AC Induction Motor when used with a compatible G120 Series Modular Control Unit.
**THIS MODULE HAS BEEN REPLACED. The PM240 is now only available as a spare item.
The replacement is a PM240-2, please see below**
Add a compatible G120 Series Modular Control Unit and Operator Keypad (see linked products below) to complete the G120 Inverter Drive.
Size F - 350mm Wide x 316mm Deep x 635mm High (excluding Control Unit). IP20
Weight: 39kg
90kW, 178A: 136% x 57 seconds every 5 minutes. 160% for 3 seconds every 5 minutes. High Overload.
110kW, 205A: 10% x 59 seconds every 5 minutes. 150% for 1 second every 5 minutes. (Fan/Pump Rated / Variable Torque)
Braking(DBr): to 5.5 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page.
Input Voltage: Three Phase 380V-480V ± 10% at 50-60Hz ± 5%
Input Current: 205A at High Overload, 234A when Fan/Pump rated.
EMC Filters: None (Unfiltered - external option)
Wall mount in clean environment or cubicle mount.
Rated 50°C ambient at High Overload, 40°C when Fan/Pump rated.
Ventilation space in front: 65mm
Ventilation space above: 350mm
Ventilation space below: 350mm
Ventilation space at sides: 0mm
Heat Loss at max output: 2.4kW
Mounting via 4 x 8.5mm diameter slotted holes at rear on 300mm x 598mm centres.
Manufacturer part number is 6SL3224-0BE38-8UA0 (6SL3224-OBE38-8UA0).
Download the Siemens SINAMICS G120 Power Module PM240 Installation Manual from the link below:-