Siemens SINAMICS PM240 Power Module for 7.5kW (10HP) 400V Three Phase Motor to 19A at High Overload or 11kW (15HP) to 25A when Fan/Pump rated. Converts fixed frequency three phase 400V Input to variable frequency three phase 400V for speed and torque control of a standard AC Induction Motor when used with a compatible G120 Series Modular Control Unit.
Limited Stock.
**THIS MODULE HAS BEEN REPLACED. The PM240 is now only available as a spare item.
The replacement is a PM240-2, please see below**
Add a compatible G120 Series Modular Control Unit and Operator Keypad (see linked products below) to complete the G120 Inverter Drive.
Size C - 189mm Wide x 185mm Deep x 334mm High (excluding Control Unit). IP20
Weight: 6.5kg
7.5kW, 19A: 150% overload for 57 seconds every 5 minutes. 200% for 3 seconds every 5 minutes. (High Overload / Constant Torque)
11kW, 25A: 110% overload for 57 seconds every 5 minutes. 150% for 3 seconds every 5 minutes. (Fan/Pump Rated / Variable Torque)
Braking(DBr): to 56 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page.
Input Voltage: Three Phase 380V-480V ± 10% at 50-60Hz ± 5%
Input Current: 23.7A at High Overload, 31.5A when Fan/Pump rated.
EMC Filters: Internal, to EN 55011 Class A (Industrial)
Wall mount in clean environment or cubicle mount.
Rated 50°C ambient at High Overload, 40°C when Fan/Pump rated.
Ventilation space in front: 65mm
Ventilation space above: 125mm
Ventilation space below: 125mm
Ventilation space at sides: 50mm
Heat Loss at max output: 297W
Mounting via 4 x 5.5mm diameter holes at rear on 167mm x 323mm centres.
Manufacturer part number is 6SL3224-0BE27-5AA0 (6SL3224-OBE27-5AA0).
Download the Siemens SINAMICS G120 PM240 Power Module Installation Manual from the link below:-