Siemens SINAMICS PM240 Power Module for 4kW (5HP) 400V Three Phase Motor to 10.2A at High Overload or when Fan/Pump rated. Converts fixed frequency three phase 400V Input to variable frequency three phase 400V for speed and torque control of a standard AC Induction Motor when used with a compatible G120 Series Modular Control Unit.
**THIS MODULE HAS BEEN REPLACED. The PM240 is now only available as a spare item.
The replacement is a PM240-2, please see below**
Add a compatible G120 Series Modular Control Unit and Operator Keypad (see linked products below) to complete the G120 Inverter Drive.
Size B - 153mm Wide x 165mm Deep x 270mm High (excluding Control Unit). IP20
Weight: 4.3kg
4kW, 10.2A: 150% overload for 57 seconds every 5 minutes. 200% for 3 seconds every 5 minutes. (High Overload / Constant Torque)
4kW, 10.2A: 110% overload for 57 seconds every 5 minutes. 150% for 3 seconds every 5 minutes. (Fan/Pump Rated / Variable Torque)
Braking(DBr): to 160 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page.
Input Voltage: Three Phase 380V-480V ± 10% at 50-60Hz ± 5%
Input Current: 13.4A at High Overload, 13.4A when Fan/Pump rated.
EMC Filters: None. (Unfiltered)
Wall mount in clean environment or cubicle mount.
Rated 50°C ambient at High Overload, 40°C when Fan/Pump rated.
Ventilation space in front: 65mm
Ventilation space above: 100mm
Ventilation space below: 100mm
Ventilation space at sides: 30mm
Heat Loss at max output: 183W
Mounting via 4 x 4.8mm diameter holes at rear on 133mm x 258mm centres.
Manufacturer part number is 6SL3224-0BE24-0UA0.
Download the Siemens SINAMICS G120 Power Module PM240 Installation Manual from the link below:-