Siemens SINAMICS PM240 Power Module for 0.37kW (0.5HP) 400V Three Phase Motor to 1.3A at High Overload or when Fan/Pump rated. Converts fixed frequency three phase 400V Input to variable frequency three phase 400V for speed and torque control of a standard AC Induction Motor when used with a compatible G120 Series Modular Control Unit.
Add a compatible G120 Series Modular Control Unit and Operator Keypad (see linked products below) to complete the G120 Inverter Drive.
Size A - 73mm Wide x 145mm Deep x 173mm High (excluding Control Unit). IP20
Weight: 1.2kg
Overload: 150% x 57 seconds every 5 minutes. 200% for 3 seconds every 5 minutes. High Overload.
Overload: 110% x 57 seconds every 5 minutes. 150% for 3 seconds every 5 minutes. Fan/Pump Rated.
Braking (DBr): to 390 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page.
Input Voltage: Three Phase 380V-480V ± 10% at 50-60Hz ± 5%
Input Current: 1.6A at High Overload, 1.7A when Fan/Pump rated.
EMC Filters: None (Unfiltered - external option)
Wall mount in clean environment or cubicle mount.
Rated 50°C ambient at High Overload, 40°C when Fan/Pump rated.
Ventilation space in front: 65mm
Ventilation space above: 100mm
Ventilation space below: 100mm
Ventilation space at sides: 30mm
Heat Loss at max output: 97W
Mounting via 2 x 4.5mm diameter holes at rear on 160mm centres.
Manufacturer part number is 6SL3224-0BE13-7UA0 (6SL3224-OBE13-7UA0).
Download the Siemens SINAMICS G120 Power Module PM240 Installation Manual from the link below:-