Siemens SINAMICS PM240-2 Power Module for 22kW (30HP) 400V Three Phase Motor to 45A at High Overload or 30kW (40HP) to 60A when Fan/Pump rated. Converts fixed frequency three phase 400V Input to variable frequency three phase 400V for speed and torque control of a standard AC Induction Motor when used with a compatible G120 Series Modular Control Unit.
POWER MODULE ONLY: Add a compatible G120 Series Modular Control Unit and Operator Keypad to complete the G120 Inverter Drive. See linked product below.
Size FSD - 200mm Wide x 237mm Deep x 472mm High (excluding Control Unit). IP20
Weight: 18.5kg
22kW, 45A: 150% overload for 57 seconds every 5 minutes. 200% for 3 seconds every 5 minutes. High Overload.
30kW, 60A: 110% overload for 57 seconds every 5 minutes. 150% for 3 seconds every 5 minutes. Fan/Pump Rated.
Braking (DBr): to 15 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page.
Input Voltage: Three Phase 380V-480V ± 10% at 50-60Hz ± 5%
Input Current: 47A at High Overload, 57A when Fan/Pump rated.
EMC Compliance: Integrated filters to IEC EN61800-3 Category C2 (Industrial and restricted domestic)
Wall mount in clean environment or cubicle mount.
Rated 50°C ambient at High Overload, 40°C when Fan/Pump rated.
Ventilation space in front: 100mm
Ventilation space above: 300mm
Ventilation space below: 350mm
Heat Loss at max output: 770W
Mounting via 4 x M5 Fixing at rear on 430mm x 170mm centres.
Manufacturer part number is 6SL3210-1PE26-0AL0
Previous Generation: 6SL3224-0BE32-2AA0
Download the Siemens SINAMICS G120 Power Module PM240-2 Installation Manual from the link below:-