Siemens SINAMICS PM240-2 Power Module for 11kW (15HP) 400V Three Phase Motor to 26A at High Overload or 15kW (20HP) to 32A when Fan/Pump rated. Converts fixed frequency three phase 400V Input to variable frequency three phase 400V for speed and torque control of a standard AC Induction Motor when used with a compatible G120 Series Modular Control Unit.
POWER MODULE ONLY: Add a compatible G120 Series Modular Control Unit and Operator Keypad to complete the G120 Inverter Drive. See linked product below.
Size FSC - 140mm Wide x 165mm Deep x 355mm High (excluding Control Unit 432mm total). IP20
Weight: 4.8kg
11kW, 26A: 150% overload for 57 seconds every 5 minutes. 200% for 3 seconds every 5 minutes. High Overload.
15kW, 32A: 110% overload for 57 seconds every 5 minutes. 150% for 3 seconds every 5 minutes. Fan/Pump Rated.
Braking (DBr): to 30 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page.
Input Voltage: Three Phase 380V-480V ± 10% at 50-60Hz ± 5%
Input Current: 36A at High Overload, 39.90A when Fan/Pump rated.
EMC Compliance: Integrated filters to IEC EN61800-3 Category C2 (Industrial and restricted domestic)
Wall mount in clean environment or cubicle mount.
Rated 50°C ambient at High Overload, 40°C when Fan/Pump rated.
Ventilation space in front: 100mm
Ventilation space above: 80mm
Ventilation space below: 100mm
Heat Loss at max output: 370W
Mounting via 4 x 6.5mm diameter holes at rear on 343mm x 120mm centres.
Manufacturer part number is 6SL3210-1PE23-3AL0 (6SL32101PE233AL0)
Previous Generation: 6SL3224-0BE31-1AA0
Download the Siemens SINAMICS G120 Power Module PM240-2 Installation Manual from the link below:-