Siemens SINAMICS PM240-2 Power Module for 5.5kW (7.5HP) 400V Three Phase Motor to 13.2A at High Overload or 7.5kW (10HP) to 18A when Fan/Pump rated. Converts fixed frequency three phase 400V Input to variable frequency three phase 400V for speed and torque control of a standard AC Induction Motor when used with a compatible G120 Series Modular Control Unit.
POWER MODULE ONLY:- Add a compatible G120 Series Modular Control Unit and Operator Keypad to complete the G120 Inverter Drive.
Size FSB - 100mm Wide x 165mm Deep x 292mm High (excluding Control Unit). IP20
Weight: 3kg
5.5kW, 13.2A: 150% overload for 57 seconds every 5 minutes. 200% for 3 seconds every 5 minutes. (High Overload / Constant Torque)
7.5kW, 18A: 110% overload for 57 seconds every 5 minutes. 150% for 3 seconds every 5 minutes. (Fan/Pump Rated / Variable Torque)
Braking (DBr): to 75 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page.
Input Voltage: Three Phase 380V-480V ± 10% at 50-60Hz ± 5%
Input Current: 19.80A at High Overload, 22.20A when Fan/Pump rated.
EMC Filters: Unfiltered
Wall mount in clean environment or cubicle mount.
Rated 50°C ambient at High Overload, 40°C when Fan/Pump rated.
Ventilation space in front: 100mm
Ventilation space above: 80mm
Ventilation space below: 100mm
Heat Loss at max output: 200W
Mounting via 4 x M4 Fixings at rear on 80mm x 281mm centres.
Manufacturer part number is 6SL3210-1PE21-8UL0 (6SL32101PE218UL0)
Previous Generation: 6SL3224-0BE25-8UA0
Download the Siemens SINAMICS G120 Power Module PM240-2 Installation Manual from the link below:-