Universal GD200A Series AC Inverter for 22kW (30HP) 400V 3-phase motor to 45A at high overload or 30kW (40HP) to 60A when fan and pump rated. Operates in standard VxF or Sensorless Vector Control and Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor.
**Available from stock only - see replacement below**
Output Current: 45A
High Overload: 150% x 60 seconds; 200% x 1 second.
Output Current: 60A
Fan and Pump Overload: 120% x 60 seconds
Dimensions: Size 5; 255mm Wide x 245mm Deep x 407mm High.
Enclosure Rating: IP20.
Weight: 11.2kg.
Speed Control Range: 0-400Hz
Braking (DBr): Internal Braking Switch fitted.
Braking Resistor (not supplied): 17 Ohm minimum – Fit resistor only if braking is required; see linked products below.
Removable Keypad with 5 x 7 segment LED display.
2 Analogue Inputs, 8 Digital Inputs, 2 Analogue Outputs, 1 Digital Output, 2 Relay Contact sets, 1 High Frequency Input (50kHz), 1 High Frequency Output (0-50kHz)
Twin wire connection for RS485 Communications. (Modbus ASCII & Modbus RTU protocols)
Input Current: 56A High Overload, 70A Fan and Pump rated.
Input Voltage: Three Phase 380-440Vac (+10% -15%) 50/60Hz (47-63Hz)
EMC Filters: IEC EN61800-3 Second Environment (Industrial – C3).
EMC Filter may be disabled. J10 should be fitted to enable the EMC Filter.
Mounting: Cubicle mount via 4 x holes at rear for 7mm screws on 237 x 384mm centres.
Ambient: Rated at 40°C; 50°C Max with de-rate.
Ventilation space in front: [not specified], Ventilation space above and below: 100mm, Ventilation space at sides: 100mm.
Heat Loss at max output: Not given
Part number: GD200A-022G/030P-4 (GD200A022G030P4)
Download the Universal GD200A Manual from the links below:-