WEG CFW11 Series AC Inverter for 37kW (50HP) 400V 3 Ph motor to 73A at high overload, or 45kW (60HP) to 88A when Fan/Pump rated. Operates in VxF, Sensorless Vector or Full Closed-loop Flux Vector. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC induction motor or permanent magnet synchronous motor.
**Available from stock only**
Dimensions: Frame D, 300mm Wide x 305mm Deep x 504mm high.
Enclosure: IP20.
Weight: 32.6kg.
High Overload: 150% x 60 seconds every 10 minutes, 200% x 3 seconds every 10 minutes.
Low Overload: 110% x 60 seconds every 10 minutes, 150% x 3 seconds every 10 minutes when Fan/Pump Rated.
Speed Control Range: 0-300Hz (depending on control mode).
Braking: To 9.1 Ohm minimum external resistor (not supplied), see the Resistor options linked below or use the 'Which Resistor' button on this page.
Features: 2 Analogue Inputs, 6 Digital Inputs, 2 Analogue Outputs, 3 Relay Contact sets, USB Port (Type B), Real time clock, internal DC Choke.
DC Bus terminals for DC supply or common bus energy saving applications.
Programmable from a PC via USB cable and free 'G2 Superdrive' software.
Input Current: 40.2A at High Overload, or 48.4A when Fan/Pump Rated, via 100A High Speed Fuses.
Input Voltage: 380-480V Three Phase +10% -15% at 50-60Hz ±3%.
EMC Filter: Integrated, to IEC EN61800-3 Category C3 (industrial).
RFI Filters components can be disabled by the removal of 2 grounding screws if required.
Wall mount in clean environment, cubicle mount or flange mount.
Ambient Temperature: Rated 50°C.
Ventilation Space: 10mm in front, 110mm above, 130mm below or 30mm at sides (0mm with top cover removed).
Heat Loss: 1,170W at High Overload, or 1,480W when Fan/Pump rated.
Mounting via 4 x M8 bolts at rear on 200mm x 525mm centres.
Extended Warranty Available: When purchased with a WEG W22 Motor (see linked products below) the warranty for the motor and the AC Inverter can be extended to 3 years. Terms and Conditions apply, registration process is required.
Part Number: CFW11 0088T 4 OFAZ. (code 10304068). Sold under other names including Eurotherm Drives (Invensys) part number ERCFW110088T4OFAZ.
Download the WEG CFW11 Manual, Parameter Reference and Programming Guide from the links below:-