WEG Automation CFW-08 A1 Plus AC Frequency Inverter for 2.2kW (3HP) 400V 3 Ph motor in VxF or Sensorless Vector Control control to 6.5A. Simple to set-up for a standard AC Induction motor.
Size 2 - 115mm Wide x 150mm Deep x 200mm high (234mm high when included Nema 1/IP20 gland plate is fitted - see photos). IP20.
Overload - 150% x 60 seconds every 10 minutes.
Speed Control Range - 0-300Hz.
Braking - To 100 Ohm minimum external resistor (not supplied) - see the Resistor Options linked below or use the 'Which Resistor' button on this page.
Features - Removable keypad, 2 x Analogue Inputs, 4 Digital Inputs, 1 x Analogue Output, 2 x Relay Contact sets.
Programmable from a PC via 'SuperDrive' Software.
EMC Filters - Class A to 2nd Environment C2 (Industrial).
Input Current - 7.8A.
Input Voltage - 380-480V three phase +10%, -15% at 50/60Hz ±2Hz.
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above - 35mm
Ventilation space below - 50mm.
Ventilation space at sides - 15mm.
Ventilation space in front - 50mm.
Heat Loss at max output - 109W.
4 x Mountings for M4 bolts at rear.
Full part number is - CFW080065T3848EOA1FAZ - Sold under other names including Eurotherm Drives (Invensys) as ERCFW080065T3848EOA1FAZ
This sale item was priced at £253 from April 19th 2015 to April 19th 2016.
Download the WEG CFW-08 Manual and Easy Start Guide from the links below:-