IMO Jaguar VXT Series AC Inverter for 7.5kW 400V 3 Ph motor to 17.5A at High Overload or 11kW to 21.5A when Fan/Pump rated.
Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC induction motor or PM Synchronous motor.
Size: 181.5mm Wide x 213mm Deep x 285mm High. IP20
Weight: 5kg.
Output Current: 17.5A; Overload: 150% for 60 seconds, High Overload (HD)
Output current: 21.5A; Overload: 120% for 60 seconds, Fan/Pump (ND)
Ratings HND and HHD are also available for higher overload and high temperature, see product manual below for more details.
Speed Control Range: 0-500Hz, (HD) 0-120Hz (ND) 0-200Hz (Vector Control with Speed feedback).
Braking (DBr): Fitted with Internal Braking Switch. If Dynamic Braking is required an external resistor should be fitted (not supplied). 80 Ohm minimum - See the Resistor options linked below.
Removable Keypad. Can be mounted remotely. For remote mounting an extension cable is required along with standard M3 fixings (not supplied see linked products below)
2 Analogue Inputs, 7 Digital Inputs, 1 Analogue Output, 1 Relay Contact Set, 2 Digital Outputs.
Fieldbus: RS485, CANopen via RJ45 connector.
Safety circuit: Safe Torque Off (STO) to SIL 3. Supplied fitted with links to disable this feature. Remove links and fit safety circuit if STO is required.
Input Current : 23.2A (HD), 33A (ND).
Input Voltage: Three Phase 380-480Vac +10%/-15% at 50-60Hz ±5%
EMC Filters: Category C3. Immunity: Category C3(2nd Env.)(EN61800-3:2004)
Cubicle mount.
Rated 40°C Ambient.
Ventilation space in front – 0mm; 50mm if RJ45 connectors are used.
Ventilation space above and below - 100mm.
Ventilation space at sides - 10mm
Mount with 4 x M5 fixings at rear on 164mm x 205mm centres.
Full part number: VXT-22A-4. Replaces: