Vacon 100 Flow Series AC Inverter for 18.5kW (25HP) 400V 3 Ph Centrifugal Fan or Pump in VxF or Sensorless Vector control to 38A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor or permanent magnet synchronous motor.
Pump Control Features:-
Multipump: single drive, Multifollower, Multimaster, interlocking of pumps, Anti-blocking, overpressure protection. Second PID controller, 2-Zone PID Control, Frost Protection for pump, Pressure loss compensation, Start Boost, Sleep Boosting, No demand detection, Soft filling of pipe, Dry Pump supervision, Priming pump, Jockey pump, Auto-Cleaning / Anti-ragging, Real time clock based multi-pump alternation
Fan Control Features:-
Fire Mode, PID Control, real time clock with calendar.
Size MR6: 195mm Wide x 229mm Deep x 557mm High. IP54/UL Type 12.
Weight: 20kg.
Overload: 110% x 60 seconds every 10 minutes
Speed Control Range: 0-320Hz
Braking: None
Graphical Keypad, 2 x Analogue Inputs, 6 x Digital Inputs, 1 x Analogue Output, 3 x Relay Contact set, Modbus RTU (RS485), Modbus TCP (Ethernet).
Input Current: [as output current]
Input Voltage: 380-500V ±10% Three Phase at 50-60Hz -5% +10%
EMC Filters to IEC EN61800-3 Category C2 1st and 2nd Environment (Industrial and Domestic). EMC filters can be disabled if required.
Wall mount.
Rated 40°C Ambient.
Ventilation space in above: 160mm
Ventilation space below: 80mm
Ventilation space at sides: 20mm
Heat Loss at max output: [not specified]
Mounting via 4 x 9mm diameter holes at rear on 148mm x 541mm centres.
Manufacturer part number is VACON0100-3L-0038-5-FLOW+IP54
Download the Vacon 100 Flow Manual and Brochure from the links below:-