Toshiba Tosvert VF-S15 Series AC Inverter for 7.5kW (10HP) 400V 3 Ph motor in VxF or Sensorless Vector control to 17A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction or Permanent Magnet motor.
Size D: 150mm Wide x 170mm Deep x 220mm High. IP20
Weight: 4kg.
7.5kW, 17A with 150% Overload for 60 seconds or 200% for 0.5 seconds
Speed Control Range: 0.1-500Hz
Braking (DBr): Minimum 60 Ohm external resistor (not supplied) - See the Resistor options linked below or use the 'Which Resistor' button on this page.
Fixed Keypad with Speed dial
3 Analogue Inputs, 6 Digital Inputs, 1 Analogue Output, 1 Digital Output, 2 Relay Contact sets, RJ45 port for Modbus-RTU RS485 Communications.
Input Current: 26.6A
Input Voltage: 380-500V Three Phase ±10% at 50-60Hz ±5%
EMC Filters: IEC EN61800-3 Category C2 (Industrial and restricted Domestic) for motor cable lengths to 5m, C3 (Industrial) to 25m.
Wall mount in clean environment or cubicle mount.
Rated 40°C Ambient.
Ventilation space in front: [not specified].
Ventilation space above and below: 50mm.
Ventilation space at sides: 30mm (can be mounted side by side when top cover removed).
Heat Loss at max output: 254W
Mounting via 4 x 5mm holes at rear on 130mm x 210mm centres.
Manufacturer part number is VFS15-4075PL-W1. Replaces the VF-S11 and VFS7 series.
Download the Toshiba VFS15 Manual from the link below:-