Teco L510S Series AC Inverter for 7.5kW (10HP) 400V 3-phase motor in VxF or Sensorless Vector control to 17.5A. Converts fixed frequency Three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor.
Output Current: 17.5A
Overload: 150% x 60 seconds
Dimensions: Size 4; 187mm Wide x 190mm Deep x 273mm High.
Enclosure Rating: IP20.
Weight: 6.3kg.
Speed Control Range: 0-650Hz
Braking: Fitted with a Brake Switch.
Braking Resistor (not supplied): 80 Ohm – Fit resistor only if braking is required.
2 Analogue Inputs, 5 Digital Inputs, 1 Analogue Output, 1 Relay Contact set
RJ45 port for RS485 Communications.
Input Current: 19.3A
Input Voltage: Three Phase 380-480Vac (+10% -15%), 50/60Hz
EMC Filters: IEC EN61800-3 First Environment (Domestic and Industrial). Can be disabled if required.
Mounting: Cubicle mount via 4 x holes at rear for M4 screws on 176mm x 250mm centres.
Ambient: Rated 50°C.
Ventilation space in front: [not specified], Ventilation space above and below: 120mm, Ventilation space at sides: 50mm.
Heat Loss at max output: [not specified]
Part number: L510-410-SH3F
Replaces: L510-410-H3F
Download the Teco L510 Manual and Quick Start Guide from the links below:-