Teco E510 Series AC Inverter for 18.5kW (25HP) 400V 3 Ph motor in VxF or Sensorless Vector control to 40A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor.
** Please note that this product has been superceded with the E510s (see linked products below). The manufacturer recommends that all users should migrate to the E510s before the E510 is made obsolete**
Size 4: 224.6mm Wide x 198.3mm Deep x 435.8mm High (with terminal cover fitted). IP20
Weight: 10.5kg.
Overload: 150% x 60 seconds
Speed Control Range: 0-650Hz
Braking: Minimum 32 Ohm external resistor (not supplied) - see the Resistor options linked below or use the 'Which Resistor' button on this page.
2 Analogue Inputs, 6 Digital Inputs, 1 Analogue Output, 2 Relay Contact sets, 1 Safety Switch, RJ45 port for Modbus RS485 Communications.
Input Current: 48A
Input Voltage: 380-480V Three Phase +10% -15% at 50-60Hz
EMC Filters: IEC EN61800-3 / EN61800-5-1 Class A Category C2 (Industrial and restricted Domestic). Can be disabled if required.
Wall mount in clean environment or cubicle mount.
Rated 50°C Ambient.
Ventilation space in front: [not specified].
Ventilation space above and below: 120mm.
Ventilation space at sides: 50mm.
Heat Loss at max output: [not specified]
Mounting via 4 x holes at rear for M5 screws on 207mm x 303.5mm centres.
Manufacturer part number is E510-425-H3F.
Download the Teco E510 Manual and Quick Start Guide from the links below:-