Teco E510 Series AC Inverter for 5.5kW (7.5HP) 400V 3 Ph motor in VxF or Sensorless Vector control to 13A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor.
Size 3: 186.9mm Wide x 195mm Deep x 273mm High. IP20
Weight: 6.7kg.
Overload: 150% x 60 seconds
Speed Control Range: 0-650Hz
Braking: Minimum 100 Ohm external resistor (not supplied) - see the Resistor options linked below or use the 'Which Resistor' button on this page.
2 Analogue Inputs, 6 Digital Inputs, 1 Analogue Output, 2 Relay Contact sets, 1 Safety Switch, RJ45 port for Modbus RS485 Communications.
Input Current: 17A
Input Voltage: 380-480V Three Phase +10% -15% at 50-60Hz
EMC Filters: IEC EN61800-3 / EN61800-5-1 Class A Category C2 (Industrial and restricted Domestic). Can be disabled if required.
Wall mount in clean environment or cubicle mount.
Rated 50°C Ambient.
Ventilation space in front: [not specified].
Ventilation space above and below: 120mm.
Ventilation space at sides: 50mm.
Heat Loss at max output: [not specified]
Mounting via 4 x holes at rear for M4 screws on 176mm x 249.8mm centres.
Manufacturer part number is E510-408-H3F.
Download the Teco E510 Manual and Quick Start Guide from the links below:-