Teco E510 Series AC Inverter for 3.7kW (3.7HP) 400V 3 Ph motor in VxF or Sensorless Vector control to 8.8A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor.
Size 2: 198mm Wide x 218.4mm Deep x 218.4mm High. IP66
Weight: 5.98kg.
Overload: 150% x 60 seconds
Speed Control Range: 0-650Hz
Braking: Minimum 150 Ohm external resistor (not supplied).
Speed Potentiometer.
2 Analogue Inputs, 6 Digital Inputs, 1 Analogue Output, 2 Relay Contact sets, 1 Safety Switch, RJ45 port for Modbus RS485 Communications.
Input Current: 11.6A
Input Voltage: 380-480V Three Phase +10% -15% at 50-60Hz
EMC Filters: IEC EN61800-3 / EN61800-5-1 Class A Category C2 (Industrial and restricted Domestic). Can be disabled if required.
Rated 50C Ambient.
Ventilation space in front: [not specified].
Ventilation space above and below: 120mm.
Ventilation space at sides: 50mm.
Heat Loss at max output: [not specified]
Mounting via 4 x holes at rear for M5 screws on 115mm x 315mm Centres.
Manufacturer part number is E510-405-H3FN4S. (E510-405-H3F-N4S)
Download the Teco E510 Manual and Quick Start Guide from the links below:-