Santerno - AC Frequency Inverter 55 kW (75HP) 400V 3 Ph motor to 98A at high overload or 75 kW (100HP) to 133A when Fan/Pump rated, operates in VxF, Sensorless Flux Vector or full closed loop Flux Vector (when the optional encoder card is fitted). Simple set-up and ready to run in VxF from its default settings for a standard AC Induction motor.
279mm Wide x 332mm Deep x 610mm High in its IP20 case.
Weight is 36kg
Overload - 150% x 120seconds very 20 minutes.
Speed Control Range - 0/xxxHz.
Braking - into minimum 10 Ohm external resistor.
EMC Filters - Built-in as standard to environment 2 (Industrial).
3 x Analogue Inputs, 8 Digital Inputs, 3 Analogue outputs, 2 Digital outputs and 2 x relay contacts.
Input Current: - xxA via 200A High Speed fuse.
Input Voltage - 380V to 500V Three Phase +10%, -15% at 50/60Hz (±10%).
Requires an external choke to reduce the supply loading, disturbance and EMC requirements.
Cubicle mounting.
Rated at 40C Ambient.
Ventilation space above and below - 200mm.
Ventilation space at sides - 100mm.
Mounting with screw fixing for 4 x M6 at 175mm x 593mm.
Full part number is - Sinus Penta as K 0086 4T BA2K2.
Download the Santerno Sinus Penta Brochure from the link below...