Santerno - AC Frequency Inverter for a 11kW (15HP) 400V 3 Ph motor in Simple VxF or Sensorless Flux Vector control to 24A. Converts fixed frequency three phase 400V to variable frequency three phase 400V for a standard AC Induction motor.
Simple set-up from 'Quick-Start' menu for control up to twice the motors nominal speed.
Size 5: 235mm Wide x 189.5mm Deep x 320mm High - IP20 case.
Overload - 150% x 60seconds.
Speed Control Range - 0/400Hz.
Braking - 20% duty into minimum 33 Ohm external resistor.
EMC Filters - Built-in as standard to environment 2 (Industrial). External option is available for Environment 1 (Domestic).
2 x Analogue Inputs (one is Current input), 8 Digital Inputs, 1 Analogue output, 2 Digital outputs (one relay).
Input Current: - xxA via 50A circuit breaker or 60A Fuse.
Input Voltage - 380V to 480V Three Phase +10%, -15% at 50/60Hz (±5%).
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below - 100mm.
Ventilation space at sides - 50mm.
Mounting via 4 x 7mm holes at rear on 219mm x 304mm.
Full part number is - Sinus M 0017 4T BA2K2.
Download the Santerno Sinus Inverter Manual from the link below...