SSD 690+ AC Frequency Inverter 5.5kW (7.5HP) or 6.0kW to 14A for 400V 3 Ph motors in VxF, Sensorless Flux Vector or Full Closed Loop Flux Vector control including a loose Dual Encoder System Board and mounting kit. Simple set-up and ready to run in VxF from its default settings.
Size B - 177mm Wide x 181mm Deep x 233mm High.
6901 Keypad fitted. Dual encoder board requires fitting by the Customer.
Overload - 150% x 60 seconds.
Speed Control Range - 0/120Hz (default), 0/240Hz or 0/480Hz.
Braking - 100% duty into minimum 80 Ohm external resistor. See the Resistor options linked below or use the 'Which Resistor' button on this page.
4 x Analogue Inputs, 8 Digital Inputs, 3 Analogue outputs, 3 Digital outputs (relay contacts).
EMC Compliance: IEC EN 61800-3 Category C3 (Industrial).
Master and Slave Encoder inputs at 15V HTL level with repeater output.
Input Current - 19A.
Input Voltage - 380/460V three phase +-10% at 50/60Hz.
Input fuse - 20A to suit input bridge at 1150A²s
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below - 80mm.
Ventilation space at sides - 15mm.
Heat Loss at max output - 260W.
Mounting - M4 screw fixings on 129.5mm x 223mm centres.
Full part number is - 690-432140B0-BFSP00-A400
Legacy part number is - 690PB/0060/400/3/F/0011/UK/0/0/0/SHTTL/0 - Exactly the same as SSD Drives and Eurotherm Drives - 690PB/0060/400/3/0/0011/UK/0/0/0/SHTTL/0.
The menu uses simple to understand English-language terms to describe its selection and functions. The default is English, but can be changed to German, French, Spanish, Italian, Polish, Swedish and Portuguese, by going to 'System', then 'Languages' and selecting the language required.
Replaces:- 620ADV/0055/400/0010/UK/ENW/0000/000/B0/000/000