SSD 650V AC Frequency Inverter for 15kW (20HP) 400V 3 Ph motor to 30A at high overload, or 18.5kW (25HP) to 37A when Fan/Pump rated, operates in VxF or Sensorless (open loop) Flux Vector control. Simple set-up and ready to run in VxF from its default settings.
Size C - 201mm Wide x 208mm Deep x 348mm High.
Overload - 150% x 30seconds and 180% for 0.5seconds.
Speed Control Range - 0/240Hz.
Braking - 25% duty or 80% for 20seconds into minimum 50 Ohm external resistor. See the Resistor options linked below or use the 'Which Resistor' button on this page.
2 x Analogue Inputs, 3/5 Digital Inputs, 1 Analogue output, 1/3 Digital outputs (one relay and two programmable in/out).
Input Current - 37A at high overload or 44A when Fan/Pump rating set.
Input Voltage - 380/460V three phase +-10% at 50/60Hz.
Input fuse - 40A at high overload or 50A when Fan/Pump rating set - to suit input bridge at 6000A²s.
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below - 70mm.
Ventilation space at sides - 15mm.
Heat Loss at max output - 500W at high overload or 610W when Fan/Pump rating set.
Mounting with M6 screw fixing on 150mm x 335mm centres.
New part number is - 650V-432300C0-B01P00-A3
Part number was - 650VC-0150-400-0011-UK-0-0-B0-0-0 - Exactly the same as SSD Drives and Eurotherm Drives - 650VC-0150-400-0010-UK-0-0-B0-0-0.